Discussion of Tachikoma eye modeling

https://gyazo.com/f47f333ab30ed1876290965791bf06b1

At first I didn't realize the top half was through and thought there were three 30 degree slopes.

I didn't know how to fix it, so I wrote on Twitter and they told me.

2/12

https://gyazo.com/acc179964310bca6d3f408f1d6303556

The structure of the part that is visible on the outside seems to be correct; it may take some trial and error to determine where to grow the T-shape from.

https://gyazo.com/58cf2839479e39d31279d8dc94354efe

In fact, it is possible that the three eyeballs are connected to each other and not to the others, and that they are stopped by pressing down from above...

Hmmm, narrow...

https://gyazo.com/714325c203f5b9d76263681dab197441

I don't have enough material to try it, but this would just barely fit in a 2×3 gap.

https://gyazo.com/18fcd8ae848d6c76ddfc993e4883a1ca

Stable without tape!

https://gyazo.com/1e0b5b71e4beb6c63666bf8c2883dceb

2/13

I had only bought two sets last year, so I had to do some trial and error with what parts I could find. It's more severe than I thought. ......

https://gyazo.com/56d0bbe2c55f918b4f0a3ba0813ca47e

I see, as for the sides, you combine a 1×1 panel that goes through with a block that has a concave center of studs so that the pipe can go all the way in.

Is this the black bar growing sideways from the center bar? I don't have one and will buy one.

https://gyazo.com/2bb2a1733e98ddd46254dce861011176

2/15

I'm not sure if I'm getting the right response because I feel like I've twisted it up quite a bit. ......

That's what the black bars are for. I haven't tried it because I don't have it on hand, but I have a feeling you could do something similar with two arm-shaped clip bars!

https://gyazo.com/54eef574e8440e525d3372ec77b0dd78

Hmmm, I might not be able to reach it as it is.

https://gyazo.com/11c36e381d1975aef3e3f32c378056ca

I added another one and it connected at least once...

https://gyazo.com/62520c92ebb31a8d0fc9c47cf87d6be8

2/16

Sorry!

I know it sounds like I'm in the wrong place, but I just bought a few more sets today and I've been playing around with them, and I think I've got a good set up, so I'll share it with you!

I personally want to make it right because it's not a weirdly elaborate assembly and it's reasonably strong lol.

---